How to use the business card size
- Select a card standard from the dropdown, or choose Custom to enter your own width and height in millimeters.
- Set the resolution in DPI. Use 300 for professional print, or higher if your printer requires it.
- Adjust the bleed value. Most commercial printers require 3 mm (about 0.125 inches) on each side.
- Read the output rows for trim size, bleed size, safe zone and pixel dimensions to set up your design file correctly.
How business card dimensions are calculated
The trim size is the final cut dimension of the card. The bleed size adds twice the bleed margin to both width and height, because bleed extends beyond every edge. The safe zone subtracts twice the safe margin from the trim size. This tool uses a fixed 3 mm margin inside the trim line, independent of the bleed, so that text and logos are never trimmed off.
For example, a US business card size of 3.5 by 2 inches equals 88.9 by 50.8 mm. With a 3 mm bleed, the document you create must be 94.9 by 56.8 mm. At 300 DPI, one inch contains 300 pixels, so 3.5 inches becomes 1050 pixels and 2 inches becomes 600 pixels. The formula is: pixels = (mm / 25.4) x DPI, rounded to the nearest whole number.
Standard business card sizes by region
Different countries use different default dimensions. When designing for an international audience, always confirm which standard your recipient expects.
| Region | Size (mm) | Size (inches) | Pixels at 300 DPI |
|---|---|---|---|
| US / Canada | 88.9 x 50.8 | 3.5 x 2 | 1050 x 600 |
| Europe | 85 x 55 | 3.35 x 2.17 | 1004 x 650 |
| United Kingdom | 85 x 55 | 3.35 x 2.17 | 1004 x 650 |
| Japan | 91 x 55 | 3.58 x 2.17 | 1075 x 650 |
| China | 90 x 54 | 3.54 x 2.13 | 1063 x 638 |
If you need dimensions for larger printed media, the poster size calculator covers standard poster formats. For digital graphics, see the instagram post size tool.
Why bleed and safe zones matter
Bleed is the extra artwork that extends past the trim line. During printing, sheets are cut in stacks, and slight mechanical shifts mean the blade might land a fraction of a millimeter off the intended line. Without bleed, that shift leaves a thin white stripe along the edge. A 3 mm bleed on all sides is a common requirement for offset and digital printers, but check your printer's template.
The safe zone is the inner boundary where critical content like names, phone numbers and logos should stay. Anything outside the safe zone risks being trimmed away. A common rule is to keep important elements at least 3 to 5 mm inside the trim line. This calculator uses a 3 mm inset from the trim line on every side, which sits at the tight end of that range. Add more if your printer asks for it.
Setting up your design file
When creating a new document in Illustrator, InDesign, Figma or Photoshop, enter the bleed dimensions as your canvas size rather than the trim dimensions. Set guides at the trim line and the safe zone so you can see exactly where content will fall.
- Create the canvas using the bleed size from the results above.
- Add guide lines at the trim size boundaries (offset inward by the bleed amount).
- Add a second set of guides for the safe zone.
- Export as PDF with crop marks and bleed settings enabled, or as a PNG at the full bleed pixel dimensions.
Always verify your exported file against the printer template before sending it to production. Most print shops provide downloadable templates that match their specific cutting equipment.
Common mistakes to avoid
The most frequent error is designing at screen resolution (72 or 96 DPI) instead of print resolution. A 72 DPI file looks fine on a monitor but produces blurry text when printed. Always use at least 300 DPI for any business card size.
Another mistake is confusing inches and millimeters. Entering 85 inches instead of 85 mm creates a file over two meters wide. Double check your units before exporting. Finally, placing text too close to the edge without respecting the safe zone leads to cropped contact details after trimming. Use the safe zone values this tool provides to position all essential information well inside the cut line.
Worked examples
| Example | Input | Result |
|---|---|---|
| US card at 300 DPI | Card standard: us; Resolution (DPI): 300; Bleed per side (mm): 3 | Trim size: 88.9 x 50.8 mm; Bleed size: 94.9 x 56.8 mm; Safe zone: 82.9 x 44.8 mm; Pixels at 300 DPI: 1050 x 600 px; Canvas pixels at 300 DPI: 1121 x 671 px |
| European card at 300 DPI | Card standard: eu; Resolution (DPI): 300; Bleed per side (mm): 3 | Trim size: 85 x 55 mm; Bleed size: 91 x 61 mm; Safe zone: 79 x 49 mm; Pixels at 300 DPI: 1004 x 650 px; Canvas pixels at 300 DPI: 1075 x 720 px |
| Japanese card at 350 DPI | Card standard: jp; Resolution (DPI): 350; Bleed per side (mm): 3 | Trim size: 91 x 55 mm; Bleed size: 97 x 61 mm; Safe zone: 85 x 49 mm; Pixels at 350 DPI: 1254 x 758 px; Canvas pixels at 350 DPI: 1337 x 841 px |
| Custom square card | Card standard: custom; Width (mm): 65; Height (mm): 65; Resolution (DPI): 300; Bleed per side (mm): 3 | Trim size: 65 x 65 mm; Bleed size: 71 x 71 mm; Safe zone: 59 x 59 mm; Pixels at 300 DPI: 768 x 768 px; Canvas pixels at 300 DPI: 839 x 839 px |
FAQ
What is the standard US business card size?
The standard US business card size is 3.5 inches wide by 2 inches tall, which equals 88.9 by 50.8 millimeters. At 300 DPI, that translates to 1050 by 600 pixels.
What is the European business card size?
In Europe and the UK, the standard business card size is 85 by 55 mm. This is slightly narrower and taller than the US format.
How many pixels is a business card at 300 DPI?
It depends on the physical dimensions. A US card (3.5 x 2 in) is 1050 x 600 pixels at 300 DPI. A European card (85 x 55 mm) is approximately 1004 x 650 pixels.
How much bleed do I need for a business card?
Most professional printers require 3 mm (roughly 0.125 inches) of bleed on each side. Some may ask for 5 mm, so always check your printer specifications before setting up the file.
What is the safe zone on a business card?
The safe zone is the area inside the trim line where you should keep all important text and logos. Typically it is 3 to 5 mm inward from the trim edge to prevent accidental cropping during cutting.
Can I design a business card at 72 DPI?
You can, but the print quality will be poor. 72 DPI is meant for screens. For sharp printed text and images, always design at 300 DPI or higher.
Is the Japanese business card size different?
Yes. The standard Japanese business card size is 91 by 55 mm, making it wider than both the US and European formats.