How to use the freight class calculator
- Measure the longest, widest and tallest points of the shipment, packaging and pallet included.
- Enter the weight of one piece and how many identical pieces ship together.
- Pick your units.
- Read the density class as a baseline and confirm the NMFC item and class with your carrier.
How density sets the class
Less-than-truckload freight is priced by class, from 50 for dense, durable freight to 400 for very light freight. For commodities without special handling, stowability or liability concerns, the baseline class comes from density: weight in pounds divided by volume in cubic feet. A 48 x 40 x 48 inch pallet is 53.33 cubic feet. At 500 lb, density is 9.38 lb per cubic foot and the class is 100; at 1,500 lb it is 28.13 and the class is 65. This freight class calculator does that arithmetic, in inches or centimetres and pounds or kilograms, and applies the Docket 2025-1 table below.
The density table
| Density (lb per cubic foot) | Class |
|---|---|
| 50 or more | 50 |
| 35 to under 50 | 55 |
| 30 to under 35 | 60 |
| 22.5 to under 30 | 65 |
| 15 to under 22.5 | 70 |
| 12 to under 15 | 85 |
| 10 to under 12 | 92.5 |
| 8 to under 10 | 100 |
| 6 to under 8 | 125 |
| 4 to under 6 | 175 |
| 2 to under 4 | 250 |
| 1 to under 2 | 300 |
| Less than 1 | 400 |
These are the 13 density subprovisions ("subs") that NMFTA Disposition Bulletin 1371 (March 2025) adopted under Docket 2025-1, effective July 19, 2025, for density-based NMFC items. Each band reads "X but less than Y", so the lower bound belongs to the higher band and exactly 8 lb per cubic foot is class 100. NMFTA also publishes a separate, older general FCDC Density Guidelines table (2021) with more bands, such as 77.5, 110, 150, 200 and 500; this calculator does not use it.
Measuring correctly
- Measure the outermost points, including the pallet and anything that overhangs.
- Use the total weight with packaging and pallet.
- For several identical pieces, enter one piece and the quantity; or enter the whole stack as one piece.
- Carriers measure at pickup and can correct a wrong measurement, which changes the class and the price.
What this class is and is not
Density-based class is only the baseline. It applies where average density is representative and the commodity has no unusual handling, stowability or liability characteristics. Many commodities have their own NMFC item number with a fixed class or sub-items, and the item number overrides the density result. Handling, stowability and liability can also move a class. The class on your bill of lading comes from the NMFC item, and the carrier can reclassify after inspection. Source: NMFC Docket 2025-1, effective July 19, 2025. Use this page for a density estimate and a first quote, not for the bill of lading.
Method and sources
Density = weight in pounds / (length x width x height x quantity in cubic inches / 1,728), using the greatest straight-line dimensions as tendered, as in NMFTA's density guidance (help.nmfta.org, "Calculating Density Best Practices"). Classes: the 13-sub density scale in NMFTA Disposition Bulletin 1371 (Docket 2025-1, effective July 19, 2025), read from the NMFTA PDF. NMFTA also states the top three subs on its help centre (30 but less than 35 is class 60, 35 but less than 50 is 55, 50 or greater is 50). Inch to centimetre factor 2.54 and kilogram to pound 2.2046226218. Always confirm the class for your commodity in the current NMFC or ClassIT+.
Worked examples
| Example | Input | Result |
|---|---|---|
| 500 lb pallet, class 100 | Length: 48; Width: 40; Height: 48; Dimension unit: in; Total weight per piece: 500; Weight unit: lb; Number of identical pieces: 1 | Density-based freight class: 100; Density: 9.38 lb per cubic foot; Volume: 53.33 cubic feet; Weight used: 500.00 lb |
| 1,500 lb pallet, dense freight | Length: 48; Width: 40; Height: 48; Dimension unit: in; Total weight per piece: 1500; Weight unit: lb; Number of identical pieces: 1 | Density-based freight class: 65; Density: 28.13 lb per cubic foot; Volume: 53.33 cubic feet; Weight used: 1,500.00 lb |
| Two light pallets | Length: 48; Width: 40; Height: 60; Dimension unit: in; Total weight per piece: 250; Weight unit: lb; Number of identical pieces: 2 | Density-based freight class: 300; Density: 1.88 lb per cubic foot; Volume: 133.33 cubic feet; Weight used: 250.00 lb |
FAQ
How do I calculate freight class?
Divide the total weight in pounds by the volume in cubic feet to get density, then look up the density in the NMFC Docket 2025-1 table. That gives the baseline class; the NMFC item can override it.
What freight class is 10 pounds per cubic foot?
Class 92.5. Under NMFC Docket 2025-1, densities from 10 up to 12 lb per cubic foot are class 92.5; class 100 covers 8 up to 10.
Does a lower class cost less?
Generally yes. Lower numbers mean denser, easier-to-ship freight and lower rates, higher numbers the opposite.
Why did the carrier change my class?
Carriers re-measure and re-weigh. If the real density or the NMFC item differs from the declared one, the class and price change.
Is density the only thing that sets the class?
No. The NMFC item, handling, stowability and liability can set a class independent of density.
Can I enter centimetres and kilograms?
Yes. The tool converts to inches and pounds first.