Xerobit

Unit Circle Chart and Calculator

The unit circle chart lists the exact sine, cosine and tangent values for every standard angle from 0 to 360 degrees. Use the reference table below for closed-form expressions, or enter any angle into the unit circle calculator to get decimal coordinates. Everything runs in your browser without uploading data.

Result

  • Sine
    0.707106781187
  • Cosine
    0.707106781187
  • Tangent
    1
  • Coordinates
    (0.707106781187, 0.707106781187)
  • Quadrant
    I
  • Reference angle
    45°

How to use the unit circle chart

  1. Enter an angle in the input field.
  2. Select whether your angle is in degrees or radians.
  3. Read the sine, cosine and tangent values instantly.
  4. Scroll down to view the full unit circle chart with exact closed-form expressions for all special angles.

What is the unit circle?

The unit circle is a circle with a radius of exactly 1, centered at the origin (0, 0) of a coordinate plane. Every point on its edge satisfies the equation x2 + y2 = 1. When you draw an angle from the positive x-axis, the point where the terminal side meets the circle gives you the cosine as the x-coordinate and the sine as the y-coordinate. This geometric definition makes the unit circle chart the foundation of trigonometry, connecting angles directly to coordinate pairs.

Because the radius is 1, no scaling is needed. The coordinates are the raw trigonometric values. For example, at 60 degrees the point is (1/2, sqrt(3)/2), meaning cos(60) = 1/2 and sin(60) = sqrt(3)/2.

Complete unit circle chart of special angles

The table below lists every standard angle in both degrees and radians alongside the exact closed-form values for sine, cosine and tangent. These are the angles most commonly tested in geometry and precalculus courses.

DegreesRadianssin(θ)cos(θ)tan(θ)
0°0010
30°π/61/2√3/2√3/3
45°π/4√2/2√2/21
60°π/3√3/21/2√3
90°π/210undefined
120°2π/3√3/2-1/2-√3
135°3π/4√2/2-√2/2-1
150°5π/61/2-√3/2-√3/3
180°π0-10
210°7π/6-1/2-√3/2√3/3
225°5π/4-√2/2-√2/21
240°4π/3-√3/2-1/2√3
270°3π/2-10undefined
300°5π/3-√3/21/2-√3
315°7π/4-√2/2√2/2-1
330°11π/6-1/2√3/2-√3/3
360°2π010

How the unit circle calculator works

The built-in unit circle calculator takes any angle you provide and returns the corresponding sine, cosine and tangent. Internally it normalizes the angle to fall within one full revolution. If you enter degrees, it converts them by multiplying by π/180 before evaluating the trigonometric functions. For recognized multiples of 30 and 45 degrees, it snaps to the exact closed-form value to avoid floating-point drift.

For example, if you type 150 degrees, the calculator identifies the reference angle as 30 degrees. Since 150 degrees sits in the second quadrant, sine stays positive while cosine becomes negative. It outputs sin(150) = 0.5, cos(150) = -0.866025403784, and tan(150) = -0.57735026919. Tangent is simply sine divided by cosine, except at 90 and 270 degrees where cosine is zero and the result is undefined.

Quadrant signs and reference angles

A common mistake when reading a unit circle chart is forgetting that signs change depending on the quadrant. The mnemonic All Students Take Calculus helps remember which functions are positive:

  • Quadrant I (0 to 90): All three functions are positive.
  • Quadrant II (90 to 180): Only sine is positive.
  • Quadrant III (180 to 270): Only tangent is positive.
  • Quadrant IV (270 to 360): Only cosine is positive.

To evaluate an unfamiliar angle like 210 degrees, find its reference angle by subtracting 180, giving 30 degrees. Look up the values for 30 degrees on the chart, then apply the signs for Quadrant III. Sine becomes negative, cosine becomes negative, and tangent (negative divided by negative) becomes positive.

Practical uses of the unit circle

Beyond classroom exercises, the unit circle chart appears in physics, engineering and computer graphics. Alternating current in electrical circuits follows a sinusoidal wave modeled directly by the sine function on the unit circle. Game developers use these coordinates to rotate sprites and calculate trajectories. Signal processing relies on Fourier transforms, which decompose signals into sums of sines and cosines rooted in circular motion.

When working with other geometric measurements, you might also need a circle area calculator to find the space enclosed by circles of different radii, or a slope calculator to determine the steepness of lines related to tangent values. For broader measurement tasks, a general unit converter handles conversions between systems.

Worked examples

ExampleInputResult
30 degreesAngle value: 30; Input mode: degSine: 0.5; Cosine: 0.866025403784; Tangent: 0.57735026919; Coordinates: (0.866025403784, 0.5); Quadrant: I; Reference angle: 30°
Pi over 4 radiansAngle value: 0.7853981633974483; Input mode: radSine: 0.707106781187; Cosine: 0.707106781187; Tangent: 1; Coordinates: (0.707106781187, 0.707106781187); Quadrant: I; Reference angle: 45°
270 degreesAngle value: 270; Input mode: degSine: -1; Cosine: 0; Tangent: Undefined; Coordinates: (0, -1); Quadrant: On an axis; Reference angle: 90°
Negative angleAngle value: -60; Input mode: degSine: -0.866025403784; Cosine: 0.5; Tangent: -1.73205080757; Coordinates: (0.5, -0.866025403784); Quadrant: IV; Reference angle: 60°

FAQ

What is a unit circle chart?

A unit circle chart is a reference table showing the exact sine, cosine and tangent values for standard angles measured around a circle with a radius of 1. It covers angles from 0 to 360 degrees or 0 to 2 pi radians.

Why is tangent undefined at 90 and 270 degrees?

Tangent is defined as sine divided by cosine. At 90 and 270 degrees, the cosine value is exactly 0, making division impossible. Therefore the tangent is undefined at those points.

How do I convert degrees to radians for the unit circle?

Multiply the degree measure by pi and divide by 180. For example, 60 degrees times pi divided by 180 equals pi/3 radians.

Can this tool act as a unit circle calculator for non-standard angles?

Yes. Enter any number in the angle field and select degrees or radians. The calculator will return the decimal sine, cosine and tangent values for that specific angle.

What are the coordinates for 45 degrees on the unit circle?

At 45 degrees (pi/4 radians), both the x and y coordinates are the square root of 2 divided by 2, approximately 0.7071. So the point is (sqrt(2)/2, sqrt(2)/2).

Does this page upload my data anywhere?

No. The unit circle calculator and chart run entirely in your browser. No inputs or results are sent to any server.